GW Instek MFG-2000 Series - Questionable Status Register; Standard Event Status Registers

REMOTE INTERFACE
379
Questionable Status Register
Description
The Questionable Status Registers will show if any
faults or errors have occurred.
Bit Summary
Register
Bit
Bit Weight
Voltage overload
0
1
Over temperature
4
16
Loop unlock
5
32
Ext Mod Overload
7
128
Cal Error
8
256
External Reference
9
512
Standard Event Status Registers
Description
The Standard Event Status Registers indicate when
the *OPC command has been executed or whether
any programming errors have occurred.
Notes
The Standard Event Status Enable register is
cleared when the *ESE 0 command is used.
The Standard Event Status Event register is cleared
when the *CLS command or the *ESR? command is
used.