GW Instek MFG-2000 Series - FSK Rate

MODULATION
145
Range
Waveform
Carrier Frequency
Sine wave
1μHz~320MHz(max)
Square wave
1μHz~25MHz(max)
Ramp wave
1μHz~1MHz
Pulse wave
1μHz~25MHz(max)
Default frequency
100Hz
FSK Rate
FSK Rate function is used to determine rate at which the output
frequency changes between the carrier and hop frequencies. The
FSK Rate function only applies to internal FSK sources.
Panel Operation
1. Select the MOD key.

2. Press F3 (FSK).
K

3. Press F3 (FSK Rate).
Ka

4. The FSK Rate parameter will become
highlighted in the waveform display area.