GW Instek MFG-2000 Series - Selecting the Remote Interface; LAN Interface

MFG-2000 Series User Manual
198
Selecting the Remote Interface
The MFG-2000 has LAN and USB interfaces for remote control.
Only one remote interface can be used at any one time.
LAN Interface
Background
When using the LAN interface, an IP must be
specified (DHCP, Auto IP or manually
configured).
Panel Operation
1. Press the UTIL key.

2. Press F2 (Interface).
a

3. Press F3 (LAN).


4. Press F2 (Config).
g

5. Choose how to configure the
IP address. Press F1 (DHCP),
F2 (Auto IP) or F3 (Manual).
D

~
aa

Range
DHCP
Use DHCP to automatically
configure the IP address of the
unit for networks with a DHCP
server.
Auto IP
Use Auto IP to automatically
configure the IP address of the
unit when it is directly
connected to a host PC via an
Ethernet cable.
Manual
Manually configure the IP
address.