GW Instek MFG-2000 Series - Source[1|2]:Frequency:couple:ratio; Source[1|2]:Amplitude:couple:state

REMOTE INTERFACE
359
+2.0000000000000E+03
The offset of channel 2 from channel 1 is 2kHz.
SOURce[1|2]:FREQuency:COUPle:RATio
Instrument
Command
Description
Sets the frequency coupling ratio when frequency
coupling is set to ratio mode.
Syntax
SOURce[1|2]:FREQuency:COUPle:RATio {ratio}
Example
SOURce1:FREQuency:COUPle:RATio 2
Set the frequency ratio of CH2:CH1 as 2:1.
Query Syntax
SOURce[1|2]:FREQuency:COUPle:RATio?
Example
SOURce1:FREQuency:COUPle:RATio?
+1.666000E+00
Returns the CH2 to CH1 frequency ratio as 2.
SOURce[1|2]:AMPlitude:COUPle:STATe
Instrument
Command
Description
Enables or disables the amplitude coupling.
Syntax
SOURce[1|2]:AMPlitude:COUPle:STATe
{ON|Off}
Example
SOURce1:AMPlitude:COUPle:STATe on
Description
Turns amplitude coupling on.
Query Syntax
SOURce[1|2]:AMPlitude:COUPle:STATe?
Return Parameter
1
ON
0
Off
Example
SOURce1:AMPlitude:COUPle:STATe?
1
Amplitude coupling has been enabled.