GW Instek MFG-2000 Series - ARB- Add Line; ARB- Output Section

MFG-2000 Series User Manual
50
3. Press Data (F2),
3+0+0, Enter (F5).

Daa


ARB- Add Line
Example: ARB Mode, Add line, Address:Data (10:30, 50:100)
Output:

     
     
     
    
   
     
  

     

     
     
     
1. Press ARB, Edit (F2),
Line (F2), Start ADD
(F1).

Ed 
aDD
2. Press 1 + 0 + Enter
(F5), Return.

E


3. Press Start Data (F2),
3 + 0, Enter (F5),
Return.

aDaa
E 
4. Press Stop ADD (F3),
5 + 0, Enter (F5),
Return.

DD
E 
5. Press Stop Data (F4),
1 + 0 + 0, Enter (F5),
Return, Done (F5).

Daa

E  D
ARB– Output Section
Example: ARB Mode, Output ARB Waveform, Start 0, Length 1000.
Output:
1. Press ARB, Output
(F6).

O