GW Instek MFG-2000 Series - Source[1|2|3]:Arb:output

MFG-2000 Series User Manual
354
Syntax
SOURce[1|2]:ARB:OUTPut:MARKer
[<STARt>[,<LENGth>]]
Parameter
<STARt>
Start address*: 0~16384
<LENGth>
Length*: 0 ~ 16384
* Start + Length ≤ currently output arbitrary waveform
Example
SOUR1:ARB:OUTP:MARK 1000,1000
The marker output is for a start address of 1000
with a length of 1000.
SOURce[1|2|3]:ARB:OUTPut
Source Specific
Command
Description
Output the current arbitrary waveform in volatile
memory. A specified start and length can also be
designated.
Syntax
SOURce[1|2|3]:ARB:OUTPut [<STARt>[,<LENGth>]]
Parameter
<STARt>
Start address*: 0~16384
<LENGth>
Length*: 0 ~ 16384
* Start + Length ≤ currently output arbitrary waveform
Example
SOUR1:ARB:OUTP 20,200
Outputs the current arbitrary waveform in
memory.