GW Instek MFG-2000 Series - Source[3 Rf]:Pskey:source; Source[3 Rf]:Pskey:phase

MFG-2000 Series User Manual
316
Example
SOURce3RF:PSK:STAT ON
Enables PSK modulation
Query Syntax
SOURce[3RF]:PSKey:STATe?
Return Parameter
0
Disabled (OFF)
1
Enabled (ON)
Example
SOURce3RF:PSK:STAT?
ON
PSK modulation is currently enabled.
SOURce[3RF]:PSKey:SOURce
Source Specific
Command
Description
Sets or queries the PSK source as internal or
external. Internal is the default source.
Note
If an external PSK source is selected, PSK rate is
controlled by the Trigger INPUT terminal on the
rear panel.
Syntax
SOURce[3RF]:PSKey:SOURce {INTernal|EXTernal}
Example
SOUR3RF:PSK:SOUR EXT
Sets the PSK source to external.
Query Syntax
SOURce[3RF]:PSKey:SOURce?
Return Parameter
INT
Internal
EXT
External
Example
SOURce3RF:PSK:SOUR?
INT
The PSK source is set to internal.
SOURce[3RF]:PSKey:PHASE
Source Specific
Command
Description
Sets the PSK hop frequency. The default hop
frequency is set to 180°.