GW Instek MFG-2000 Series - Source[3 Rf]:Pskey:internal RATE

REMOTE INTERFACE
317
Note
For PSK, the modulating waveform is a square
wave with a duty cycle of 50%.
Syntax
SOURce[3RF]:PSKey:PHASE
{<phase>|MINimum|MAXimum}
Parameter
<phase>
0～360°.
Example
SOUR3RF:PSK:DEV 180
Sets the PSK hop deviation to to 180°.
Query Syntax
SOURce[3RF]:PSKey:DEViation?
[MINimum|MAXimum]
Return Parameter
<percent>
0～360°.
Example
SOUR1:PSK:DEV? MAX
360°
Returns the maximum hop deviation allowed.
SOURce[3RF]:PSKey:INTernal RATE
Source Specific
Command
Description
Sets or queries the PSK rate for internal sources
only.
Note
External sources will ignore this command.
Syntax
SOURce[3RF]:PSKey:INTernal:RATE {<rate in Hz>
|MINimum|MAXimum}
Parameter
<rate in Hz>
2 mHz~1MHz
Example
SOURce3RF:PSK:INT:RATE MAX
Sets the rate to the maximum (1MHz).
Query Syntax
SOURce[3RF]:PSKey:INTernal:RATE?
[MINimum|MAXimum]
Return Parameter
<NR3>
Returns the PSK rate in
Hz.
Example
SOURce3RF:PSK:INT:RATE? MAX
+1.0000E+06
Returns the maximum PSK rate allowed.