GW Instek MFG-2000 Series - Ramp Waveform

OPERATION
81
Range Pulse Width
≧20ns(limited by the
current frequency setting)
5. To set parameter
Load/Frequency/Amplitude/DC Offset/
Phase, please refer to page 83 - 89.
Ramp Waveform
Panel Operation
1. Press the Waveform key.

2. Press F5 (Ramp) to create a
ramp waveform.
a

Parameter
settings
3. Press F1 (SYM). The SYM
parameter will be
highlighted in the parameter
window.
Y
