GW Instek MFG-2000 Series - Copy a Waveform

ARBITRARY WAVEFORMS
231
10. Press F5 (Done) to confirm
the line edit.
D

11. Press Return to return to the
previous menu.

The red line was created below with the following
properties:
Start Address: 0, Start Data: 0
Stop Address: 500, Stop Data: 0
Copy a Waveform
Panel Operation
1. Press the ARB key.

2. Press F2 (Edit).
Ed

3. Press F3 (Copy).


4. Press F1 (Start).
a

5. The Copy From properties will become
highlighted in Red