GW Instek MFG-2000 Series - Page 236

MFG-2000 Series User Manual
236
7. Press F5 (Enter) to save the
settings.
E

8. Press Return to return to the
previous menu.

9. Repeat steps 4~8 for Length
(F3).
gh

10. Press F4 (Done) to confirm
the protected area.
D

11. Press Return to return to the
previous menu.

12. Press F4(Done) to protect the
selected areas of the
waveform.
D

Protect All
13. Press F1 (ALL) to protect the
whole waveform.


14. Press F1 (Done) to confirm.
D

15. Press Return to return to the
previous menu.

Unprotect All
16. Press F5 (Unprotect) to
unprotect the whole
waveform.


17. Press F6 (Done) to confirm.
D

18. Press Return to return to the
previous menu.
