GW Instek MFG-2000 Series User Manual

MFG-2000 Series User Manual
8
Power Supply
WARNING
 AC Input voltage: 100 ~ 240V AC, 50 ~ 60Hz.
Or 100 ~ 120V AC, 220 ~ 240V AC,50 ~ 60Hz
(With power amplifier)
 Connect the protective grounding conductor of
the AC power cord to an earth ground to
prevent electric shock.
Fuse
WARNING
Fuse type: T0.5A/250V. T1A/250V(With power
amplifier).
 Only qualified technicians should replace the
fuse.
 To ensure fire protection, replace the fuse only
with the specified type and rating.
 Disconnect the power cord and all test leads
before replacing the fuse.
 Make sure the cause of fuse blowout is fixed
before replacing the fuse.
Cleaning the
function
generator
 Disconnect the power cord before cleaning the
function generator.
 Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid
into the function generator.
 Do not use chemicals containing harsh products
such as benzene, toluene, xylene, and acetone.
Operation
Environment
 Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (Note below)
and avoid strong magnetic fields.
 Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0°C to 40°C

GW Instek MFG-2000 Series Specifications

General

Brand	GW Instek
Model	MFG-2000 Series
Category	Inverter
Language	English