244
PIANO / ENSEMBLE Voice Sections
t OCT
From the screen shown at the top of the previous page, press the DIRECTION “u” button once. The
Information Center Display should now look like this:
The box underneath “OCT” should now be highlighted.
You can now use the VALUE knob to select the Octave range in which the selected Voice Section will
play. You can select from -2 (up to two octaves down) to +2 (up to two octaves up).
Turn the VALUE knob to the right to raise the Octave.
Turn the VALUE knob to the left to lower the Octave.
NOTE: The actual sounding octave will be the sum of this Parameter plus the Octave setting
controlled by the OCTAVE buttons on the Control Panel. For more information, please consult the
SPECIAL PERFORMANCE FEATURES chapter of this Guide starting on page 554
HA<O> SKX PRO Reference Guide
To Next Page
