603
MIDI
From the screen shown on the previous page, press the DIRECTION “q” button once.
The box to the right of “RECEIVE DUMP” should be highlighted.
MIDI RECEIVE DUMP ENABLE / DISABLE
The MIDI Dump Parameters are for use when you want to record and save a musical performance to a
connected MIDI Data recorder.
On the SKX PRO, the total onboard memory can be transmitted and received as a series of System Exclusive
(SysEx) messages called a Memory Dump. This Parameter allows you to select whether or not you want
System Exclusive messages received as part of a Sequence. When this Parameter reads Enable Sysx data will
be received. When it reads Disable, SysEx data will not be received.
Turn the VALUE knob to make your selection.
IMPORTANT NOTE: If you attempt to receive a Data Dump to the SKX PRO when Disable is displayed,
the Information Center Display will flash, "Data Protect !" This ensures that you do not overwrite data
accidentally.
HA<O> SKX PRO Reference Guide
To Next Page
