Hammond Skx PRO - BNK-L - External Zone Bank Select (LSB); PROG - External Zone Program Number

623
MIDI
From the screen shown at the bottom of the previous page, press the DIRECTION “u” button once.
The box underneath “BNK-L” should be highlighted.
BNK-L - External Zone Bank Select (LSB)
This Parameter allows you to set the value for Controller #32 - Least Significant Bit.
Use the DIRECTION “p” and “q” buttons to move up and down among the three External Zones,
“1” “2" and “3.”
Turn the VALUE knob to make your selection.
From the above screen, press the DIRECTION “u” button once.
The box underneath “PROG” should be highlighted.
PROG - External Zone Program Number
This Parameter allows you to select from the Program Number, and therefore the Voice, for the selected
External Zone.
Use the DIRECTION “p” and “q” buttons to move up and down among the three External Zones,
“1” “2" and “3.”
Turn the VALUE knob to make your selection.
HA<O> SKX PRO Reference Guide