371
MONO SYNTH Voice Section
From the screen shown on the previous page, press the DIRECTION “q” button once.
The box to the right of “CUTOFF” should be highlighted.
CUTOFF
This Parameter allows you to adjust the Cutoff Frequency of the Filter. You can select from 0 to 127.
From the above screen, press the DIRECTION “q” button once.
The box to the right of “RESONANCE” should be highlighted.
RESONANCE
This Parameter allows you to add a controlled amplification to the Cutoff Frequency, coloring the original
pitch. You can select from 0 to 127.
HA<O> SKX PRO Reference Guide
To Next Page
Loading...
