64
Combinations
Accessing the REVERB FUNCTION Mode Page using the Shortcut:
Press and Hold the ON button located underneath the REVERB DEPTH knob. After approximately
1 second, you will see the screen shown at the bottom of the previous page.
Accessing the REVERB FUNCTION Mode Page using the APP MENU:
1. From any of the PLAY Mode Pages, Press and Hold the MANUAL “ ” button. The Information
Center Display should now look like this:
The “EDIT COMBINATION” box should be highlighted.
NOTE: The APP MENU may not display all Voice Sections, depending on which Voice Sections
are active for the selected Combination or which ALLOCATE buttons are “ON” (LED lit). If the Voice
Section you want is not displaying, press the PLAY button, press the ALLOCATE button for the
Voice Section you want to turn it “ON” (LED lit), then repeat Steps 1 and 2 above.
2. Release the MANUAL “ ” button and press the ENTER button. The Information Center
Display should now look like this:
3. Press the PAGE “u” button two times. The Information Center Display should now look like this:
HA<O> SKX PRO Reference Guide
To Next Page
