72
Combinations
From the screen shown on the previous page, press the DIRECTION “q” to highlight the box
underneath “MONO/POLY.”
The box to the right of “PEDAL” should be highlighted.
MONO/POLY PEDAL MODE
This Parameter allows you to select the playing mode of the PEDALs. The data chart below shows the
options you can select.
PEDAL MODE Options
Parameter Description
Poly Polyphonic - more than one pedal note can sound at a time, as on a vintage organ.
Mono Monophonic low-note select - if more than one pedal is played only the lowest note will sound.
Turn the VALUE knob to make your selection.
From the above screen, press the DIRECTION “q” button once.
The box underneath “PEDAL SUSTAIN” should be highlighted.
PEDAL SUSTAIN LENGTH
The Pedal Sustain features allows the Pedal tones to decay smoothly upon release, much in the manner
of a string bass.
The PEDAL SUSTAIN button turns Pedal Sustain “ON” or “OFF.”
This Parameter allows you to adjust the amount of Pedal Sustain, or length of time the Pedal note
will continue to sound after the pedal is released. You can select from 1 (shortest) to 5 (longest).
Turn the VALUE knob to the right to lengthen the Pedal Sustain.
Turn the VALUE knob to the left to shorten the Pedal Sustain.
NOTE: The PEDAL SUSTAIN button must be “ON” (LED lit) in order to hear the effect of this Parameter.
HA<O> SKX PRO Reference Guide
To Next Page
