Hioki IM3536 - Performing Continuous Measurement; Checking Continuous Measurement Results

94
Performing Continuous Measurement
4.2 Performing Continuous Measurement
Perform continuous measurement.
On the measurement screen, a list of the
panels selected for use in continuous mea-
surement will be shown on the SET screen
(BASIC tab).
Touch the TRIG key.
Continuous measurement will start.
To cancel continuous measurement, touch
the STOP key.
4.3 Checking Continuous Measurement Results
Measurement results can be checked on the measurement screen. If another screen is being dis-
played, touch the EXIT key.
Measured values for the selected No. 1 parameter and No. 3 parameter will be displayed.
Measrement screen
Panel No.
No. 1 parameter
measured value
Measurement results
Comparator measurement:
Displays judgment results for the No. 1 and No. 3 parameters.
BIN measurement:
Displays judgment results for the No. 1 and No. 3 parameters.
Scrolls the
screen.
Displays a list of panels
for which continuous
measurement is to be
performed.
No. 3 parameter
measured value