22
Screen Layout and Operation
Viewing measured values (Measurement screen)
This is the rst screen displayed when the instrument is turned on.
Touch the EXIT key to return to the measurement screen from another screen.
Displaying elements used in both LCR mode and continuous measurement mode
Indicates the usage status of internal memory (p. 87).
Menu keys
MODE
Select the measurement mode
(
p. 24).
SET Set the advanced settings
(p. 25).
ADJ Set the correction (p. 27).
(LCR mode only)
SYS Set the system (p. 28).
(LCR mode only)
FILE Set the save settings (p. 29).
Displays error mes-
sages.(p. 230)
Indicates
the selected
measurement
mode.
Indicates the interface that is cur-
rently set (p. 132).
Operation keys
Displays operation keys as appropriate for the
measurement mode and instrument state.
Indicates that a USB
ash drive is connect-
ed (p. 138).
To Next Page
Loading...
