Hioki IM3536 - Saving Measurement Data; X84; Saving Measurement Data in Text

141
Saving Measurement Data
8.4 Saving Measurement Data
Saving Measurement Data in text
Measurement data
*
can be saved to a USB ash drive in the CSV format. (*: Refers to one piece of
data measured before the
SAVE
key is touched. To save all measurement data stored in the instru-
ment’s memory, see "Memory function (saving measurement results)" (p. 86).)
The le extension is “.csv.”
LCR mode
Saves the measurement values displayed in the current screen in CSV
format.
Continuous measurement
mode
Saves the measurement result of each panel in CSV format.
Saves all measurement conditions and measurement data for each
panel in a single le.
Measurement results are saved in the following order: measuring instrument information, time and
date, measurement conditions, measurement parameters, and measurement values.
The header (time and date, measurement conditions, measurement parameters, delimiter, and
quotation mark type) can be congured as desired.
8
Using USB Flash Drive (Saving and Loading Data)