Hioki IM3536 - 2.3 Connecting the Power Cord

28
Screen Layout and Operation
Conguring the instrument’s interfaces, setting the time and date, and
checking the system (SYS screen)
This screen is used to congure the instrument’s interfaces, to set the time and date, and to check
the system. (LCR mode only)
1
Touch the SYS key.
2
Touch a tab.
I/F Congure interface settings
INFO Check the version and other system
information
TEST Check the system
CLOCK Set the time
3
Touch the key for the parameter you
wish to set.
The settings screen for the parameter will
be displayed.
4
Check the settings and version number
or perform a test measurement.
See “7 Setting the System” (p. 131).