88
Setting Application Settings
LCD display auto-off (power-saving mode)
You can set whether the LCD display remains on continuously or turns off automatically. Setting the
LCD display to OFF causes the LCD display to automatically turn off after there is no panel use for
10 seconds, thereby reducing power consumption. The default setting is ON (i.e., the LCD display
remains on continuously). (This setting is linked to the auto-off setting for continuous measurement
mode (p. 96).)
Screen display method (For more information, see p. 24):
(Measurement screen) SET key>(SET screen) ADVANCED tab>DISP key
1
Touch the OFF key or ON key.
OFF Turns OFF the LCD.
The LCD turns off after approxi-
mately 10 seconds elapse since
the touch panel was last touched.
ON Sets the LCD to always on.
2
Touch the EXIT key twice.
Displays the measurement screen.
When you want to turn the backlight on
again
If you touch the touch panel while the back-
light is off, the backlight will turn on again.
The backlight will turn off again if you do not
touch the touch panel for about 10 seconds.
To Next Page
Loading...
