Hioki IM3536 - Setting the Interface (Controlling the Instrument from a Computer); Checking the Version of the Instrument

132
Setting the Interface (Controlling the Instrument from a Computer)
7.1 Setting the Interface (Controlling the Instrument
from a Computer)
This section describes how to congure the settings that are used to control the instrument via its
USB, GP-IB, RS-232C, or LAN interface.
Screen display method (For more information, see p. 28.):
(Measurement screen) SYS key>(SYS screen) I/F tab
1
Select the interface you wish to cong-
ure.
2
Congure the selected interface.
USB, RS-232C, GP-IB, and LAN settings:
Refer to the Communications Instruction
Manual on the bundled LCR Application
Disc.
3
Touch the EXIT key.
Displays the measurement screen.
7.2 Checking the Version of the Instrument
This section describes how to check the instrument’s serial number, version, MAC address, USB
ID, and interfaces.
Screen display method (For more information, see p. 28.):
(Measurement screen) SYS key>(SYS screen) INFO tab
1
Check the instrument’s version and
other information.
2
Touch the EXIT key.
Displays the measurement screen.