96
Setting the LCD display auto-off (When You Wish to save the power)
4.5 Setting the LCD display auto-off (When You
Wish to save the power)
You can set whether the LCD display remains on continuously or turns off automatically. Setting the
LCD display to OFF causes the LCD display to automatically turn off after there is no panel use for
10 seconds, thereby reducing power consumption. The default setting is ON (i.e., the LCD display
remains on continuously). (This setting is linked to the auto-off setting for LCD mode [p. 88].)
Screen display method (For more information, see p. 24):
(Measurement screen) SET key>(SET screen) ADVANCED tab>DISP key
1
Touch the OFF key.
OFF The LCD turns off after approximately
10 seconds elapse since the touch
panel was last touched.
ON Sets the LCD to always on.
2
Touch the EXIT key twice.
Displays the measurement screen.
When you want to turn the backlight on
again, touch the touch panel.
To Next Page
Loading...
