Hioki IM3536 - X84; Key Tones and Judgment Tones

89
Setting Application Settings
Key tones and judgment tones
You can set the operation sound and each of the beep sounds for judgment results.
Screen display method (For more information, see p. 24):
(Measurement screen) SET key>(SET screen) ADVANCED tab>BEEP key
1
Congure beep tones.
JUDGE: Beep sound settings for when
comparator judgment
OFF When a comparator judgment is
made, no beep sound is emitted.
When judgment performed with 1 comparator
IN When the comparator result is IN,
a beep sound is emitted.
NG When the comparator result is LO
or HI, a beep sound is emitted.
When judgment performed with 2 comparators
IN When both of these comparator
results are IN, a beep sound is
emitted.
NG When either one is LO or HI, a
beep sound is emitted.
KEY: Beep sound setting for when key
pressed
OFF When a key is pressed, no beep
sound is emitted.
ON When a key is pressed, a beep
sound is emitted.
TONE: Beep tone type
You can select from four types (A, B, C,
and D).
2
Touch the EXIT key twice.
Displays the measurement screen.
If an invalid key is pressed or an operation causes an error, an error tone will sound regardless of whether
the beep tone is turned on or off.
3
Performing Measurements in LCR Mode