36
Turning the Power On and Off
2.5 Turning the Power On and Off
Before turning on the instrument, be sure to read “Before Turning Power On” (p. 13).
Once you have connected measurement cables or an optional Hioki probe or test xture, turn on
the instrument’s main power switch. Once the main power switch has been turned on, the instru-
ment can be turned on and off using the power button on the front panel.
This feature is convenient when embedding the instrument in an automated tester or on a produc-
tion line. (If the main power switch is turned off in the suspended state, the instrument will power on
in the suspended state when the main power switch is next turned on.)
Rear
Front
Main power switch
Power
button
To Next Page
Loading...
