Hiwin D1-N Series - Page 46

D1-N Series Servo Drive User Manual Wiring
4-6 HIWIN MIKROSYSTEM Corp.
MD17UE01-1906
 D1-N-90
Table 4.1.2.2
Connector Specification Manufacturer
Wire Gauge
Range
Note
Connector for AC
main power cable
European standard 4-pin 10.16 mm
pluggable connector (Female)
PHOENIX
Part number: 1967472
20-11 AWG
Suggested: 11
AWG, 600 V
Connector for
motor power
cable
European standard 4-pin 10.16 mm
pluggable connector (Female)
PHOENIX
Part number: 1970359
20-11 AWG
Suggested: 11
AWG, 600 V
Connector for
regenerative
resistor
European standard 4-pin 10.16 mm
pluggable connector (Male)
PHOENIX
Part number: 1967472
20-11 AWG
Suggested: 11
AWG, 600 V
Connector for
control power
European standard 4-pin 5 mm
pluggable connector (Female)
PHOENIX
Part number: 1786857
22-14 AWG
Suggested: 18
AWG
Connector for
control signals
European standard 40-pin 3.5 mm
pluggable connector (Female)
PHOENIX
Part number: 1790470
24-30 AWG
Connector for
feedback signal
D-Sub 15-pin standard solder
connector (Male)
24-30 AWG
D-Sub 15-pin standard solder
connector (Female)
Connector for
motor over
temperature
signal
European standard 2-pin 5 mm
pluggable connector (Female)
PHOENIX
Part number: 1786831
20-28 AWG
Connector for
safety function
European standard 6-pin 3.5 mm
pluggable connector (Female)
PHOENIX
Part number: 1790302
24-30 AWG
Connector for
mini USB
communication
USB 2.0 type A to
mini-B 5-pin (1.8 M) (Shielding)
HIWIN
Part number:
051700800366
Optional
Note:
Use wiring tools to avoid electric shock when wiring.