D1-N Series Servo Drive User Manual Errors And Warnings
HIWIN MIKROSYSTEM Corp. 9-11
9.4 Troubleshooting
9.4.1 Status indicator
The status indicator of D1-N servo drive is indicated in figure 9.4.1.1.
Figure 9.4.1.1
Table 9.4.1.1
No status +24 Vdc power is not supplied.
Blinking red and green The servo drive is powering on.
Blinking green No power has been supplied to the motor.
Solid green Power is being supplied to the motor.
Blinking green and solid red No power has been supplied to the motor and an error occurs.
Note:
When the indicator turns red and green at the same time, the color looks like orange.
To Next Page
Loading...