Hiwin D1-N Series User Manual

D1-N Series Servo Drive User Manual About This User Manual
HIWIN MIKROSYSTEM Corp. 1-3
MD17UE01-1906
1.1.1 Risk identification
Warning
When installing or replacing motor power cable, wiring
must be correctly performed. Incorrect wiring may lead
to abnormal operation of motor, serious injury or
machine damage. Connect
motor power cable
according to the noted symbols on the cable.
Warning
Each motor has its maximum rated load. If the motor is
overloaded, it may le
ad to abnormal operation of
motor, machine damage or injury.
Warning
If users are using a self-made extension cable for motor
encoder, please carefully read through our manuals or
contact customer service department. Incorrect
connection may lead to abnormal operation of motor or
injury.
Warning
If encoder extension cable is accidently disconnected
when power on, reconnect it to the servo drive after
power off. If not, it may lead to abnormal operation of
motor, machine damage or injury.
Warning
When using open-type optical feedback system (such
as optical scale), if there is stain or scratch on the
scale, it may lead to abnormal operation of motor,
motor damage, machine damage or injury.
Warning
If encoder connector is subject to any impact during
operation, check if the servo drive is damaged. It is
suggested to power on the servo
drive again.
Otherwise it may lead to abnormal operation of motor,
machine damage or injury.
Warning
When using open-
type magnetic feedback system
(such as magnetic scale),
prevent strong magnetic
objects from getting close to the scale. Otherwise, it
may lead to abnormal operation of motor, motor
damage, machine damage or injury.
Warning
Do not disconnect encoder extension cable and
reconnect it to the servo drive when power on, or it
may lead to abnormal operation of motor, machine
damage or injury.
Warning
When using linear motor with Hall sensor, ensure the
selected Hall sensor is applicable to your linear motor.
If not, it may lead to motor burn-
out, abnormal
operation of motor or injury.
Warning
If users are using a self-made signal extension cable
of H
all sensor, please carefully read through our
manuals or contact customer service department.
Incorrect connection may lead to abnormal operation
of motor or injury.

Hiwin D1-N Series Specifications

General

Brand	Hiwin
Model	D1-N Series
Category	Amplifier
Language	English