Honeywell DR4500A - Table 5-28 Procedure for Displaying the Totalizer Value

Operation - Resetting and Displaying Totalizer Value
Release M DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual 145
April 2017
Displaying the totalizer value
Follow the procedure in 86HTable 5-28 to display the totalizer value.
Table 5-28 Procedure for displaying the totalizer value
Step
Operation
Press
Action/Result
1
Alternating Totalizer
Display
LOWR
DISP
Until you see:
Upper Display: tPV VALUE
Lower Display: (total value)
ATTENTION
When two totalizers are configured,
notice that channels #1 and #2 totalizer values are
alternately displayed.
2
Display Channel #1
totalizer
▲ or ▼
Until CHN “1” indicator lights.
Upper Display: 1tPV VALUE
Lower Display: (total value) (8 digits maximum)
3
Display Channel #2
totalizer
▲ or ▼
Until CHN “2” indicator lights.
Upper Display: 2tPV VALUE
Lower Display: (total value) (8 digits maximum)
4
Return to Alternating
Display
▲ and ▼
simultaneously
You will see:
Upper Display: SCAN
Lower Display: (total value) (8 digits maximum)
After the keys are released, the upper display
alternately shows #1, #2 PV values while lower display
shows #1, #2 totalization values.
5
Return to Normal PV
Display
LOWR
DISP
Returns to normal PV display.