Honeywell DR4500A User Manual

Release L DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual 55
February 2017
3. Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke sequences to select and
establish (configure) pertinent control data best suited for your application.
What’s in this section?
The table below lists the topics that are covered in this section.
Topic
See Page
3.1 Overview
55
3.2 Configuration Prompts
56
3.3 How To Get Started
58
3.4 Configuration Tips
59
3.5 Configuration Procedure
60
3.6 Input Set Up Group
62
3.7 Pen Set Up Group
64
3.8 Chart Set Up Group
65
3.9 Totalizer Set Up Group
66
3.10 Control Set Up Group
67
3.11 Tuning Parameters Set Up Group
69
3.12 SP Ramp Set Up Groups
70
3.13 Timer Set Up Group
71
3.14 Alarms Set Up Group
72
3.15 Auxiliary Output Set Up Group
74
3.16 Modbus Communications Set Up Group
75
3.17 Options Set Up Group
76
3.18 Lockout Set Up Group
77
3.19 Configuration Record Sheet
78
Prompts
To assist you in the configuration process, there are prompts that appear in the upper and lower displays.
These prompts let you know what group of configuration data (set up prompts) you are working with and
also the specific parameters (function prompts) associated with each group.
Figure 3-1 shows an overview of the prompt hierarchy.

Honeywell DR4500A Specifications

General

Brand	Honeywell
Model	DR4500A
Category	Recording Equipment
Language	English