To Next Page

To Previous Page

Configuration

How To Get Started

58 DR4500A Classic Series Circular Chart Recorder With or Without Control Product Manual Release M

April 2017

3.3 How To Get Started

Read the configuration tips

Read subsection 3.4 Configuration Tips which will help you to easily and quickly configure your recorder.

Read configuration procedure

Read subsection 3.5 Configuration Procedure which tells you how to access the Set Up groups, and the

function parameters within each of these groups that are shown in the Prompt Hierarchy in Figure 3-1.

Set Up groups

The Set Up groups and function parameters are listed in the order of their appearance. The list includes the

name of the prompt, the range of setting or selections available, and the factory setting. It allows you to

quickly find a parameter and obtain the available range or selection you require.

Parameter explanations or definitions

If you need a detailed explanation of any prompt listed, refer to Section 4 – Configuration Parameter

Definitions. This section lists the set up and function prompts, the selections or range of settings that you

can make for each, plus a detailed explanation or definition of each parameter.

Configuration record sheet

Located in subsection 3.19 is a Configuration Record Sheet. When you make your configuration selections,

record them on this sheet. Then you will have a record of how the recorder was configured.

Set up the recorder in this order:

 Inputs (Display will be correct)

 Pens

 Chart

 Alarms

 Control

 Tuning

 Other functions as needed

Honeywell DR4500A User Manual

Questions and Answers: