CONFIGURING MAXPRO NVR
Configuring the Honeywell cameras with MAXPRO NVR Wizard
112 MAXPRO NVR 5.0 Installation and Configuration Guide
6
Figure 6-1 CONFIGURATION page
• If you want to change the default settings, select YES or NO corresponding to the
fields listed in the following table or click STEP 2 to accept the default settings, and
proceed to the CAMERA DISCOVERY page in step 2.
• Select the required language from the drop-down list. The supported languages are
Arabic, Czechoslovakian, Dutch, French, German, Russian, Italian, Polish,
Portuguese, Spanish, and English. The default language is English (US English).
• Select the Launch Wizard on Windows startup check box to launch the wizard
automatically each time you start Windows.
Field Description
CONFIGURATION SETTINGS
Video Format Select “NTSC” or “PAL” based on your region.
Enable
Continuous
Recording
Start recording as soon as soon as the camera is added. 24/7
continuous recording is enabled for all the cameras.
Dynamic IP
Synchronization
MAXPRO
NVR software automatically synchronizes any change
in the camera’s IP address.
For example. if a camera is restarted, and a new IP is associated
to the camera, then the MAXPRO NVR software automatically
detects the changed IP address and synchronizes it to the
camera so that live viewing and recording is not disturbed.
Auto Add
Discovered
Camera
Any newly connected camera is automatically discovered and
added to the camera’s list.
DISCOVERY SETTINGS
Choose Camera
Network
Enables you to choose your camera network from the drop-
down list.
Click the refresh icon to refresh the drop-down list.
Auto IP
Assignment
Assigns a valid address to cameras with Automatic Private IP
Addressing (APIPA).
Note: Use this option only if you do not have a DHCP server
and want to assign an IP address in your computer network
range to the cameras.
Range for IP Assignment: The MAXPRO NVR system
automatically detects all the cameras in this range on the
network.
From, To: Type the IP range.
Filter Discovered
Cameras
Enables you to filter the discovered cameras based on the
camera model and IP range.
• Filter By Camera Type: Select this check box and then
select a camera model from the drop-down list by clicking
the respective check boxes.
• Filter By IP Range: Select this check box and then type the
IP range in From and To.
To Next Page
Loading...
