To Next Page

To Previous Page

. . . . .

MAXPRO NVR MOBILE APP

Introduction

MAXPRO NVR 5.0 Installation and Configuration Guide 241

•Double-click User in the User Name column. Type in a name for the MAXPRO

Mobile user. This is the name that will be used to log on to the mobile device to

connect to the MAXPRO NVR.

• (Optional) Double-click in the User Description column to add an appropriate

description (for example, Mobile app operator).

•In the Role drop-down list, select the appropriate user permission (for example,

Operator, as shown above).

• Select the Password Never Expire check box if you do not want to change the

password periodically.

•Select Anonymization Check box to use the Privacy Protection feature (GDPR

Favored). See Privacy Protection Settings section for more information.

Limitation with Privacy Protection Settings

• If Anonymization is enabled in NVR application, then user will not be able to see the

video in MAXPRO mobile app/Web client. An error message is displayed.

• Anonymization is not supported in Web. If user is tries to see Anonymized video and

also camera Anonymized option is enabled then an error message “Trying to access

Anonymized Stream” is displayed.

•

If Four Eye Authentication option is enabled in NVR application then user will not be

able to view playback video in MAXPRO mobile app/Web client

• When an Operator (non-admin) logs into the Web Client and tries to view playback

for any video then an error message “Four Eye authentication Privilege Failure” is

displayed.

Honeywell MAXPRO NVR Series User Manual

Questions and Answers: