4-45
Diagnostic Tests and Utilities
HP Designjet 4000/4020 Printer Series Service Manual
10.5 Others >>> Enable Connectivity
This option allows you to enable or disable connectivity, depending on the
security requirements of the user.
1 In the Diagnostics submenu, scroll to "10. Others" and press Enter.
2 In the Others submenu, scroll to "10.5 Enable Connectivity" and press
Enter.
The printer will display the following:
3 Use the Arrow keys to select ’Yes’ to enable connectivity and press the
Enter key to confirm the selection.
The printer will display the following:
4 Press any key on the Front Panel and the printer will reboot, when the printer
has fully intialized, connectivity will be enabled.
Press Enter to
confirm selection
Use UP and
DOWN keys
to select
P
HO
N
E
S
UP
PO
R
T
To Next Page
Loading...
Need help?
General