Wireless Interface Configuration
Modifying Antenna Settings
You can use the show command to display the current radio settings from the
wireless interface configuration level.
HP420(if-wireless-g)#show
Wireless Interface Common Information
============================================================
----------------Identification------------------------------
Description : RD-AP#3
Radio mode : 802.11g only
Channel : 9
Supported SSID number : 8
Supported Total Client number : 64
Status : Enabled
----------------802.11 Parameters---------------------------
Transmit Power : 50% (6 dBm)
Max Station Data Rate : 24Mbps
Multicast Data Rate : 2Mbps
Fragmentation Threshold : 2024 bytes
RTS Threshold : 2000 bytes
Beacon Interval : 60 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval : 30 Mins
DTIM Interval : 2 beacon
Preamble Length : SHORT-OR-LONG
Slot time : SHORT
----------------Security------------------------------------
Static Keys :
Key 1: OPEN Key 2: OPEN Key 3: OPEN Key 4: OPEN
-----------------Antenna------------------------------------
Antenna mode : Single
Antenna gain attenuation
Low channel : 40%
Mid channel : 79%
High channel : 40%
===========================================================
HP420#
6-21
To Next Page
Loading...
