Huawei ECC800 - Page 125

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
5 Power-On Commissioning
Issue 06 (2020-04-22)
Copyright © Huawei Technologies Co., Ltd.
114
Step 5 Commission the cabinet electronic clasp locks.
Table 5-16 Function check
Function
Path
Setting
View
cabinet
electronic
clasp lock
information
Choose
Monitoring
>
Cabinet >
IT
Cabinet101
>
E-LOCK1
.a
Click the Running
Info tab.
View the running information about
cabinet electronic clasp lock 1 on the
WebUI.
Change an
cabinet
electronic
clasp lock
name
Click the Running
Parameters tab.
Change the cabinet electronic clasp
lock name.
Remotely
open a
cabinet
electronic
clasp lock
Click the Controls
tab.
Select Open front door or Open
back door from the Cabinet door
control drop-down list box, and click
Submit to remotely open the door.
Open
cabinet
electronic
clasp locks
in batches
Choose Monitoring > Cabinet,
click the Controls tab
Select Open front door, Open back
door, or Open all doors from the
Open the door drop-down list box,
select the setting, and click Submit.
The cabinet electronic clasp locks
unlock the doors in batches based on
the signal value.
a: Intelligent lock 1 of IT cabinet 101 is used as an example.
----End