Huawei FusionModule2000 - Page 221

FusionModule2000 Smart Modular Data Center
Installation Guide
15 Installing Monitoring Devices
Issue 02 (2018-03-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
212
Figure 15-48 Pad mounting kit
Table 15-2 Pad mounting kit
No.
Item
Description
1
Pad mounting kit
Provides the position for installing the pad
and access control.
2
Baffle plate with the cable
hole in the lower part
Used for installing the fingerprint and card
reader or the fingerprint and card reader
with a keypad.
3
Baffle plate with the cable
hole in the middle
Used for installing the card reader with a
keypad or the IC card reader.
4
Pad power connector
holder
Used for securing the pad power connector.
5
M5x10 tapping screw
Used for securing the pad mounting kit.
6
M4x12 screw assembly
Used for securing the pad power connector
holder.
7
M3x8 countersunk screw
Used for securing the baseplate of the
fingerprint and card reader, the fingerprint
and card reader with a keypad, or the card
reader with a keypad.