Huawei FusionModule2000 - Tools and Instruments

FusionModule2000 Smart Modular Data Center
Installation Guide
2 Installation Preparations
Issue 02 (2018-03-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
System
Category
Component
Document
Cable trays
Indoor Cable Tray Installation Guide
The ECC800 and NetEco versions depend on the version in use. Click on the ECC800 and the
NetEco WebUI to obtain the ECC800 and NetEco versions.
2.6 Tools and Instruments
This section lists the tools and instruments required for installation.
Table 2-3 General tools
Name, Specifications, and Appearance
Protective gloves
Marker
Measuring tape (5
m)
Level
Step ladder (2 m)
Phillips screwdriver
Phase sequence
meter
Flat-head
screwdriver (2–5
mm)
Adjustable wrench
(6")
Socket wrench
M4/M6/M8/M12
Hex key
Box-end wrench
(M6, M8, and M12)
Torque wrench (28
mm)
Solid wrench
(12#/13#/18#)
Cotton cloth
Labels