FusionModule2000 Smart Modular Data Center
Installation Guide
6 Installing the Network Cabinet, IT Cabinet, and Battery
Cabinet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Procedure
Step 1 Open the cabinet rear door and use four M4 screws to secure the vertical ground bar to the
right mounting bar.
The specific securing positions are the screw holes in the middle of the 04 U, 14 U, 29 U, and 39 U
positions.
Figure 6-8 Installing a vertical ground bar
----End
6.9 (Optional) Setting a Cabinet Code Lock
Context
The cabinet code lock can be unlocked with a key or password. If you do not need the
password function, you can use a key to unlock the cabinet.
The preset password for the cabinet code lock is 0, 0, 0.
To Next Page
Loading...
Need help?
General