FusionModule2000 Smart Modular Data Center
Installation Guide
15 Installing Monitoring Devices
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 15-76 Installing a temperature and humidity sensor
----End
15.9 Installing a WLDS900 Water Sensor
The water sensor mentioned in this section is configured for the smart module, rather than air
conditioners. If this water sensor is installed, you do not have to install the water sensor
configured for air conditioners.
The water sensor should be installed in the lowest position in the equipment room and cannot
be installed in a place (such as water pipes or cold air outlets) that is prone to condensing.
To Next Page
Loading...
Need help?
General