FusionModule2000 Smart Modular Data Center
Installation Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing the PDC
5.1 Moving the PDC
Context
Only trained personnel are allowed to move the PDC. Use a forklift truck to transport the
PDC box secured to a wooden support to the installation position.
To prevent the PDC from falling over, secure the PDC box to the forklift truck using ropes
before moving it.
Move the PDC with caution to avoid bumping or toppling, which may damage the PDC.
After placing the PDC in the installation position, unpack it with care to avoid scratches.
Keep the PDC steady during unpacking.
If the PDC installation environment is in poor condition and the PDC needs to be stored
for a long time after it is unpacked, take measures to prevent dust. It is recommended that
the PDC be wrapped with the original plastic coat.
Preparations
Tools: forklift truck, adjustable wrench, diagonal pliers
Materials: PDC and accessories, sliding plate
Document: cabinet layout diagram
Skill requirement: forklift driver, common technician
Procedure
Step 1 Check whether the PDC packing is intact.
Step 2 Cut off and remove the binding straps, and remove the packing.
Step 3 Remove the plastic bag and take out the fitting box and sliding plates.
Step 4 Check whether the PDC is intact.
To Next Page
Loading...
Need help?
General