FusionModule2000 Smart Modular Data Center
Installation Guide
4 (Optional) Installing Bases
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Procedure
Step 1 Connect one end of the base ground cable to any of the base ground points, and connect the
other end to the general ground bar of the equipment room.
Alternatively, connect one end of the base ground cable to any of the base ground points, and connect
the other end to the ground bar at the rear door bottom inside the cabinet.
Figure 4-18 Base grounding diagram
Figure 4-19 Connecting the ground cable between the base and cabinet
----End
To Next Page
Loading...
