Huawei FusionModule2000 - Page 25

FusionModule2000 Smart Modular Data Center
Installation Guide
2 Installation Preparations
Issue 02 (2018-03-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
Name, Specifications, and Appearance
Claw hammer
Vacuum cleaner
Hacksaw
Handsaw
Right angle
Heat shrink tubing
Network cable tester
Rubber mallet
Adjustable socket
screwdriver
Flashlight
Clamp meter
N/A
N/A
NOTE
This table may not list some tools required at specific sites. Onsite installation personnel and technical
support personnel should prepare tools based on site requirements.
Table 2-4 Transportation and unpacking tools
Tool Appearance, Specifications, and Name
Pallet truck
Diesel forklift
Lifting rope (bearing
capacity ≥ 400 kg)
Lever (bearing
capacity ≥ 400 kg)
Table 2-5 Air conditioner tools
Tool Appearance, Specifications, and Name
Cutter
Water pipe thread
sealant
a
Welding torch
5% silver solder