FusionModule2000 Smart Modular Data Center
Installation Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 4 Combine adjacent cabinets.
1. Remove the M5x10 tapping screws that secure the connecting kit and then remove the
connecting kit.
2. Remove M4x10 screw assemblies from the position for combining cabinets.
3. Secure the connecting kit using the M4x10 screw assemblies.
Figure 8-5 Combining cabinets
----End
To Next Page
Loading...
Need help?
General