v ASYNC_MIRROR_REMOTE_RPO_TOO_SHORT
Specified Remote RPO is too short.
v ASYNC_MIRROR_RPO_TOO_SHORT
Specified RPO is too short.
v ASYNC_MIRROR_RPO_TOO_LONG
Specified RPO is too long.
v ASYNC_NOT_SUPPORTED_IN_TARGET
Asynchronous Mirror is not supported by specified Target.
v BAD_REMOTE_VOLUME_NAME
Slave volume name does not exist
v BAD_REMOTE_VOLUME_SIZE
Master and slave volumes contain a different number of blocks
v CONS_GROUP_BAD_NAME
Consistency Group name does not exist.
v CONS_GROUP_HAS_MIRROR
Consistency Group has mirroring defined for it.
The mirror definition has to be removed.
v CONS_GROUP_MIRRORING_NOT_SUPPORTED_IN_TARGET
Consistency Group mirroring is not supported by target machine.
v INTERVAL_SHOULD_BE_SHORTER_THAN_RPO
Schedule interval must me shorter than the RPO.
The newly defined schedule has to be shorter than the RPO.
v MAX_MIRRORS_REACHED
Maximum number of mirrors already defined
v NOT_ENOUGH_SPACE_ON_REMOTE_MACHINE
Not enough free space to set requested size of slave volume
v NO_ASYNC_IN_THIN_PROVISIONED_POOL
Thin provisioned Pool cannot contain Volumes with Asynchronous Mirroring
v VOLUME_BAD_NAME
Volume name does not exist
v VOLUME_IS_MASTER
Local volume is already defined as a master volume
v VOLUME_IS_SLAVE
Volume is defined as a slave volume
v REMOTE_VOLUME_EXISTS
Slave volume name already exists and cannot be created
v REMOTE_MAX_VOLUMES_REACHED
Maximum number of volumes already defined on remote machine
v REMOTE_MAX_MIRRORS_REACHED
Maximum number of mirrors already defined on remote machine
v VOLUME_BAD_PREFIX
Volume name has a reserved prefix
v REMOTE_POOL_DOES_NOT_EXIST
Pool does not exist on remote machine
v REMOTE_POOL_NOT_SPECIFIED
Chapter 11. Remote Mirroring 217
To Next Page
Loading...
Need help?
General
