A Pool on remote machine must be specified when a slave volume is to be
created
v REMOTE_TARGET_NOT_CONNECTED
There is currently no connection from the target system
v VOLUME_IS_SNAPSHOT
Operation is not permitted on snapshots
v REMOTE_VOLUME_IS_SNAPSHOT
Slave volume is a snapshot
v TARGET_BAD_NAME
Target name does not exist
v TARGET_BAD_TYPE
Target machine is not XIV machine
v TARGET_NO_ACCESS
No access permissions to slave machine
v TARGET_NOT_CONNECTED
There is currently no connection to the target system
v REMOTE_VOLUME_LOCKED
Slave volume is locked
v REMOTE_VOLUME_HAS_DATA_MIGRATION
Data Migration is defined for slave volume
v VOLUME_DATA_MIGRATION_UNSYNCHRONIZED
Data Migration has not completed to this volume
v TIMEOUT
Remote operation did not complete in time
v VOLUME_HAS_MIRRORING_SNAPSHOTS
Volume has snapshots created by previous mirroring process.
v SLAVE_VOLUME_NOT_FORMATTED
Slave volume is not formatted
v TARGET_DOES_NOT_ACCEPT_XIV_COMMANDS
Target system does not accept XIV management commands
v SYNC_MIRROR_HAS_NO_RPO
Synchronous Mirror does not have an RPO.
v REMOTE_CONS_GROUP_IS_MIRRORED
Remote Consistency Group has mirroring defined for it.
v REMOTE_SCHEDULE_DOES_NOT_EXIST
Specified Schedule does not exist on remote machine
v SCHEDULE_DOES_NOT_EXIST
Specified Schedule does not exist
v REMOTE_CONS_GROUP_BAD_NAME
Remote Consistency Group name does not exist
v REMOTE_VOLUME_IS_MASTER
Volume on remote machine is currently defined as Master
v REMOTE_VOLUME_IS_SLAVE
Slave volume is already defined as a slave volume
v REMOTE_MAX_MIRROR_CAPACITY_REACHED
218 IBM XIV Storage System User Manual
To Next Page
Loading...
