Intel S7000FC4UR - Page 201

Intel® Server System S7000FC4UR TPS BIOS User Interface
Revision 1.0
179
Setup Item Options Help Text Comments
Set User Password [123abcd] User password is used to
control entry access to
BIOS Setup Utility.
Only alphanumeric
characters can be used.
Maximum length is 7
characters. It is case
sensitive.
Note: Removing the
administrator password will
also automatically remove
the user password,.
Available only if the Administrator
Password is installed
This option is only to control
access to BIOS Setup.
The user password provides only
limited access to BIOS Setup
configuration options.
Front Panel Lockout Enabled
Disabled
Locks the power button and
reset button on the system’s
front panel. If [Enabled] is
selected, power and reset
must be controlled via a
system management
interface.
TPM State <
Enabled &
Activated,
Enabled &
Deactivated,
Disabled &
Activated,
Disabled &
Deactivated
>
Information Only.
Shows the current TPM device
state.
A disabled TPM device does not
execute commands that use TPM
functions and TPM security
operations are not available.
An enabled and deactivated TPM
is in the same state as a disabled
TPM except setting of TPM
ownership is allowed if not present
already.
An enabled and activated TPM
executes all commands that use
TPM functions and TPM security
operations are available.
TPM Administrative
Control
No Operation
Turn On
Turn Off
Clear Ownership
[No Operation] – No
changes to current state.
[Turn On] – Enables and
activates TPM.
[Turn Off] – Disables and
deactivates TPM.
[Clear Ownership] –
Removes the TPM
ownership authentication
and returns the TPM to
factory default state.
Note: BIOS setting will
return to [No Operation] on
every boot cycle by default.