98 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS23x, 34x, 43x
6.3 Positioning Mode
6.3.1 Positioning Mode
In this mode, the QuickStep motor positions the motor via commands sent over the se-
rial interface. Various operating parameters can be changed continuously while the mo-
tor is running. This mode of operation is used primarily in systems where the Controller
is permanently connected to a PC/PLC via the interface. This mode is also well suited for
setting up and testing systems. The mode is also used when programming is done.
To Next Page
Loading...